- Agilent chemstation change data file path how to#
- Agilent chemstation change data file path Pc#
- Agilent chemstation change data file path windows#
The first thing that you want to do is run your standards.
Agilent chemstation change data file path how to#
This will be a quick tutorial on how to build a calibration table in Chemstation, with screenshots. Please leave a comment if you have any feedback or questions, thanks! I hope these basic steps of checking/pinging the ip address have been helpful. From here you can view/edit the ip address of what Openlab is expecting your instrument to be configured to be. In Openlab chemstation, launch the Openlab control panel, select your instrument on the left hand side, and click on configure instrument on the top of the screen. From here you can view/edit the ip address of what chemstation thinks the instrument is configured to be. If you are using a classic version of chemstation (pre-Openlab), go to start, all programs, agilent chemstation, and launch the configuration editor. If pinging the instrument was successful, the last piece of the puzzle is ensuring the configuration in chemstation has the proper ip address for the instrument.
Agilent chemstation change data file path Pc#
Does the LAN card on both the pc and instrument show flashing LED lights on the port? If not it may be a hardware problem with one of the cards. If there are 2 LAN cards on the pc, its possible that you are connecting to the wrong one, or changed the ip address on the wrong one. If there is a switch or hub in between make sure that port is operational. If not, then check that the cable from the pc to the insturment is connected and good, maybe try swapping it out. You should get 4 replies back, 100% packets sent and received. Once in the command prompt type: ping 10.1.1.101 (or whatever the ip address of the instrument is).
Agilent chemstation change data file path windows#
In Windows XP, hit start, and select run, type CMD and hit enter. In Windows 7, click on the Start key for windows, in the search bar type CMD and hit enter. To do this you need to launch the command prompt. Hit OK to save the changes.Īfter determining that the addresses are compatible, the next thing you want to do is ping the instrument. Make sure to keep the subnet mask: 255.255.255.0.
You will see a screen like this:įrom here you can view and change the IP address. Right-click on that connection, then double click on IPv4. The local are connection is usually the one that is connected to the instrument. Most people will have two connections, a “house” or company network, and a local area connection. You can see all your network connections on this screen. How can I check the ip address on the pc? You can do this through the control panel of windows, then go to network and internet, then network connections. I may write an article on that procedure in the future. From there you can keep the default or change to a new address using Telnet.
If it’s not the default, and you are not sure what the address is, then you will have to go through a process of changing switches on the LAN card and setting it to default. You can also connect the gameboy to the module and view/edit the ip address. The LC is not as straight forward, but the default is 192.168.254.11. From here you can see what the address currently is, and you can also change it as well. How can I check the ip address of the GC? This is pretty simple, on the majority of these GCs you can find out by hitting options, then communication on the gc front panel.
For example: if the gc is 10.1.1.101, the pc needs to be 10.1.1.x. The main idea being, is the ip address of the instrument and the ip address of the pc compatible? You want the ip address to match up until the last set of numbers. A 68/7890 GC, as well as 1100-1290 LCs use LAN communication for the most part. There are some basics that can be checked that may be the solution if you are having this problem. There’s nothing like preparing your samples and starting chemstation, only to see “instrument offline”.
0 kommentar(er)
